For a few years I have been on a quest to reliably stream HD video from my NAS to my TV. I’ve tried both Powerline and draft 802.11n wireless solutions, but neither has proven sufficient. Which is I was excited to see Netgear release the MCAB1001 MoCA Coax-Ethernet Adapter Kit (~$200). I used to build out 10Base2 networks back in the day, so why not use the existing coaxial cable running through my home to move data?
Our review unit consisted of a pair of MoCA devices, power adapters, stands, a pair of Ethernet cables and a pair of coax cables. I was glad to see that Netgear included the coax cables. I had feared that I would be taking a trip to The Shack.
Setup of the MoCA units is very simple, although your mileage may vary. I unplugged the cable from the TV and plugged it in the Coax In port on the MoCA device. I then ran the included coax from the Coax Out to the TV. Next, I connected the Ethernet cable to the Ethernet port and connected the other end to my Popcorn Hour A-110. (Netgear, we’d be happy to take a look at the EVA9150. Hint, hint.) I then connected the second MoCA device to my router. I made sure the Mode button on each device was set to Normal and then plugged in the power. After a few seconds the Ethernet and MoCA lights started flashing. I turned the wireless off on the A-110 and browsed to my movie share and started streaming a 720p HD file. The video played without a problem! I then played a 1080p HD video and am happy to say that it played without a problem as well.